A Site dedicated Vintage technology
  1. Home
  2. /
  3. Vintage Cameras
  4. /
  5. Agfa Karat film advance repair

Agfa Karat film advance repair

This post describes how I stripped down and cleaned up the Agfa Karat film advance/frame counter assembly, which is found under the top cover of the camera. It's a pretty straight forward operation, but I think it's always easier if you can see what to expect before you take it apart, so I've posted this to hopefully help someone else who may need to do the same operation in the future.

Agfa Karat film advance images

The Karat, at least the f/3.5 model I have, is quite easy to work on and is also pretty simple to get apart. The pictures above basically describe what to do, but I'll highlight in the notes below any points which need to be made.

Removing the top cover is just a matter of unscrewing the two screws which hold it and the centre screw from the film advance - make sure you use the right size screwdriver for these or the heads can get chewed up. The top then lifts off, but you have to unscrew the top of the shutter release first.

I found a fair amount of gunk under the top cover on my camera and stripped all the components off to give them a clean in IPA. That seemed to work and everything went back together well, but initially when I put it all together I found a couple of problems.

First, the frame counter was too loose and although it would work, it could also easily move about. I found I had to bend the small brass spring next to the lens release button in towards the middle of the camera to properly engage with the frame counter to stop this.

The other issue was that the film advance would lock after the shutter was fired. After I took the top off again, I discovered that the spring which sits on the film advance shaft needs to mate with a cut-out in the top cover. You can see in the pictures above where the spring needs to be positioned, and the cut-out in the back of the top cover. Once these correctly lined up, everything was fine.

With the frame advance mechanism cleaned up, I then moved on to fixing the main problem area with the camera, which was the focus mechanism.

How useful was this article?

Click on a star to rate it!

Average rating 4.5 / 5. Vote count: 2

No votes so far! Be the first to rate this article.

As you found this post useful...

Please consider sharing to social media

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

Leave a Reply

Newsletter



    Area of interest

    Cameras & Lenses
    Photos & Films
    Projectors
    Radios & Tape Recorders

    I accept the privacy statement

    You can edit your preferences and unsubscribe at any time after subscribing. Privacy Statement

    All content @SimonHawketts 2024
    linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram
    ×